|
|
| Part Number
| Qty
| Description
|
Motherboard / Chassis | MBD-X12SPM-LN6TF
CSE-211M | 1
1 | Super X12SPM-LN6TF Motherboard
2U Chassis |
Backplane | BPN-SAS3-826TQ-B2B | 1 | 2-port 2U SAS3 12Gbps backplane, support up to 2x 2.5-inch SAS3/SATA3 HDD/SSD |
Cable 1 | CBL-0010L | 1 | 9 PIN SERIAL PORT DTK CABLE, LF |
Cable 2 | CBL-0206L | 2 | 48CM SATA ROUND S-S PBF |
Cable 3 | CBL-CDAT-0662 | 1 | 8 Pin to 8 Pin Round SGPIO Cable, 61.5cm, 28AWG, Pinout 1-1 |
Cable 4 | CBL-PWCD-0974 | 2 | 48VDC input power cable, 2M, 12AWG, 3 wires, RoHS/REACH,RoHS |
Cable 5 | CBL-SAST-1206LP-85 | 1 | SlimSASLP x8 (RA) to SlimSAS x8 (STR),26CM,85 OHM,RoH |
Cable 6 | CBL-SAST-1207LP-85 | 1 | SlimSASLP x8 (STR,RSC) to SlimSAS x8 (STR),26CM,85 OHM |
Cable 7 | CBL-SAST-1270A-85 | 1 | [NR] 2x PCIe x16 on riser PCBA to 2x x16 edge cards,90CM,RoH |
Power Distributor | PDB-PT211M-3424 | 1 | 2U support redundancy powers up to 800W for SC211M with 2 Mi |
Power Supply | PWS-601S-1R | 2 | 1U 600W Redundant DC48V input w/PMBus power supply, W54.5xH4 |
Riser Card | RSC-H2-68G4 | 1 | 2U LHS Hyper riser card with one PCI-E 4.0 x16 and one PCI-E |
Software | SFT-OOB-LIC | 1 | License key for enabling OOB BIOS management |
Heatsink / Retention | SNK-P0078P | 1 | 2U Passive CPU Heat Sink for X12 Generation Intel Whitley and Cedar Island Platforms |
*Cable 8 | CBL-CDAT-1058 | 1 | [NR] NCSI 2×8 to 2×8, Ph2.54, 60cm shielded,28AWG, RoHS,RoHS |
*FAN 1 | FAN-0220L4 | 4 | 80x80x38 mm, 14.9K RPM Exhaust Fan for SYS-120P-FRDN6T Serve |
*Front Panel | FPB-TB826 | 1 | 16 pin Cable Adaptor Board for SC826 |
*Drive Tray(s) | MCP-220-00147-0B | 2 | Black gen-3 hot-swap 2.5″; Tool-less HDD tray (clip design) |
*Rail Set | MCP-290-21106-0N | 1 | 1U height sliding rail for SC211M chassis |